Publikationen

Zeitschriften

  1. P. Schuller-Götzburg, T. Forte, W. Pomwenger, A. Petutschnigg, F. Watzinger and K. Entacher. Three-Dimensional Finite Element Analysis of Maxillary Sinus Floor Augmentation with Optimal Positioning of a Bone Graft Block. Symmetry 2018, 10, 33; doi:10.3390/sym10020033 http://www.mdpi.com/journal/symmetry
  2. J. Charwat-Pessler, R. Schraml, K. Entacher and A. Petutschnigg. Tracking logs with RGB images within the wood supply chain: a preliminary study on image acquisition. Forest Products Journal: 2016, Vol. 66, No. 3-4, pp. 176-184. https://doi.org/10.13073/FPJ-D-15-00015.
  3. J. Charwat-Pessler, R. Schraml, A. Uhl, K. Entacher, A. Petutschnigg. Rückverfolgbarkeit von Rundholz innerhalb der Logistikkette Wald-Werk. Holztechnologie 56 (2015) 5.
  4. J. Charwat-Pessler, M. Musso, A. Petutschnigg, K. Entacher, B. Plank, E. Wernersson, S. Tangl and P. Schuller-Götzburg. A Bone Sample Containing a Bone Graft Substitute Analyzed by Correlating Density Information Obtained by X-ray Micro Tomography with Compositional Information Obtained by Raman Microscopy. Materials 2015, 8(7), 3831-3853; doi:10.3390/ma8073831.
  5. W. Pomwenger, K.Entacher, H.Resch, P. Schuller-Götzburg. Multi-patient finite element simulation of keeled versus pegged glenoid implant designs in shoulder arthroplasty. Medical & Biological Engineering, September 2015, Volume 53, Issue 9, pp 781-790.
  6. W. Pomwenger, K.Entacher, H.Resch, P. Schuller-Götzburg. Need for CT-based bone density modelling in finite element analysis of a shoulder arthroplasty revealed through a novel method for result analysis. Biomed Tech 2014; 59(5):421-430.
  7. M. Flamm, G. Fritsch, M. Hysek, S. Klausner, K. Entacher, S. Panisch, A.C. Soennichsen. Quality improvement in preoperative assessment by implementation of an electronic decision support tool. Journal of the American Medical Informatics Association 04/2013.
  8. W. Pomwenger, K. Entacher, A. Petutschnigg, H. Resch, P. Schuller-Goetzburg. Finite Element Analysis in Shoulder Arthroplasty – On the influence of Bone Density, Implant Positioning and Size. Submitted 2013.
  9. J. Charwat-Pessler, M. Musso, K. Entacher, B. Plank, P. Schuller-Götzburg, S. Tangl, and A. Petutschnigg. Improving CT Image Analysis of Augmented Bone with Raman Spectroscopy. Journal of Applied Mathematics Volume 2013 (2013), Article ID 271459, 10 pages http://dx.doi.org/10.1155/2013/271459
  10. P. Schuller-Goetzburg, K. Entacher, A. Petutschnigg, W. Pomwenger, and F. Watzinger. Sinus elevation with a cortical bone graft block: a patient-specific three-dimensional finite element study. The International Journal of Oral & Maxillofacial Implants, 27 (2) 2012
  11. K. Entacher, M. Öttl, A. Petutschnigg und R. Bauer. Finite-Elemente-Analyse von Holz auf Basis von CT-Daten. Holztechnologie, 53(1):29-34, 2012.
  12. W. Pomwenger, K. Entacher H. Resch, P. Schuller-Götzburg. Aus der Praxis der Schultersimulation – Übernahme der Knochendichte in ANSYS. caMe - Computer Aided Medical Engineering 3:12-17, 2011.
  13. K. Entacher, A. Petutschnigg, W. Pomwenger, H. Resch, P. Schuller-Götzburg. Patientenspezifische Optimierung von Schulterimplantaten. caMe - Computer Aided Medical Engineering 1(1):12-18, 2010.
  14. K. Entacher und A. Petutschnigg. 3D-Modellierung von Holz auf Basis von CT-Daten. Holztechnologie, 49(4):37-40, 2008.
  15. A. Petutschnigg, K. Entacher und H. Katz. Verallgemeinerte lineare Modelle zur Holzcharakterisierung für gezählte Merkmale. Holztechnologie, 49(3):5-9, 2008.
  16. P. Schuller-Götzburg, K. Entacher, A. Petutschnigg, M. Eichriedler, R. Forstner und H. Resch, Entwicklung von 3D-FE Modellen zur Simulation und Optimierung von Implantaten. BIOmaterialien 7(4) : 263-270, 2006.
  17. Hechenleitner and K. Entacher. A parallel search for good lattice points using LLL-spectral tests. Journal of Computational and Applied Mathematics, 189 (1-2) : 424-441, 2006.
  18. J. Scheibenreiter, K. Entacher und A. Neumüller. Vergleichende Untersuchungen zwischen industriell eingesetzten und einem neu entwickelten Keilzinkenprofil. Holztechnologie, 47 (1) : 5-10, 2006.
  19. K. Entacher. On the Beauty of Uniform Distribution Modulo One. The Mathematica Journal, volume 9 (3), 2005.
  20. K. Entacher, Th. Schell and A. Uhl. Bad Lattice Points, Computing, 75, 281-295, 2005. Erratum in: Computing, 77, 129 (2006).
  21. K. Entacher, S. Knoflach und J. Scheibenreiter. Holzprodukte im konstruktiven Einsatz: Charakteristische Festigkeiten. Holz Bildung Forschung, 6, 2004.
  22. K. Entacher, G. Laimer, H. Röck and A. Uhl. Normalization of the Spectral Test in High Dimensions. Monte Carlo Methods and Applications, 10 (3-4) : 341 – 366, 2004.
  23. K. Entacher, Th. Schell, W.Ch. Schmid and A. Uhl. Defects in parallel Monte Carlo and quasi-Monte Carlo integration: the Leap-Frog Case. Parallel Algorithms and Applications, 18 (1-2) : 13-26, 2003.
  24. K. Entacher. Discrepancy Estimates Based on Haar Functions. Mathematics and Computers in Simulation, 55 : 49--57, 2001.
  25. K. Entacher, Th. Schell and A. Uhl. Optimization of random number generators: efficient search for high-quality LCGs. Probabilistic Engineering Mechanics, 16 (4) : 289-293, 2001.
  26. K. Entacher, Th. Schell and A. Uhl. Efficient lattice assessment for LCG and GLP parameter searches. Mathematics of Computation, 71 : 1231-1242, 2001.
  27. M. Brandstätter, K. Entacher, and S. Wieselthaler. Die Delaminierungsprüfung -- eine empirische Analyse. Holzforschung und Holzverwertung, 1 : 8--11, 2001.
  28. K. Entacher. Haar Function Based Estimates of the Star-Discrepancy of Plane Digital Nets. Monatshefte für Mathematik, 130 : 99-108, 2000.
  29. K. Entacher. On the Cray-System Random Number Generator. Simulation, 72(3): 163-169, 1999.
  30. K. Entacher. Parallel Streams of Linear Random Numbers in the Spectral Test. ACM Transactions on Modeling and Computer Simulation, 9(1):31-44, 1999.
  31. K. Entacher, A. Uhl, and S. Wegenkittl. Linear Congruential Generators for Parallel Monte-Carlo: the Leap-Frog Case. Monte Carlo Methods and Applications., 4(1):1-16, 1998.
  32. K. Entacher. Quasi-Monte Carlo methods for numerical integration of multivariate Haar series II. BIT, 38(2):283-292, 1998.
  33. K. Entacher. Bad subsequences of well-known linear congruential pseudorandom number generators. ACM Transactions on Modeling and Computer Simulation, 8(1):61-70, 1998.
  34. K. Entacher. Quasi-Monte Carlo methods for numerical integration of multivariate Haar series. BIT, 37(4):845-860, 1997.
  35. R. Schabetsberger, S. Brozek, K. Entacher, Ch. Jersabek, and A. Goldschmid. Effects of temperature and body weight on gastric evacuation rates of alpine newt triturus alpestris larvae. Herpetological Journal, 6 : 75-81, 1996.

Conference Proceedings

  1. R. Schraml, J. Charwat-Pessler, K. Entacher, A. Petutschnigg, A. Uhl. Review: Roundwood Tracking using Log End Biometrics, In Proceedings of the Annual GIL Meeting (GIL'2016), pp. 189-192, LNI, Gesellschaft für Informatik, 2016.
  2. S. Klausner, K. Entacher, S. Kranzer, M. Flamm, A. Sönnichsen, G. Fritsch. A Guideline Based Software for the Implementation into the Medical Environment. In proceeding of: International Humanitarian Technology Conference, Montreal, CA, Volume: 1, 2014.
  3. K. Entacher, G. Fritsch, V. Huber, S. Klausner. PROP – A Medical Expert System for Preoperative Testing. Information Quality in e-Health, Lecture Notes in Computerscience LNCS 7058, Proceedings of USAB 2011, 7th Conference of the Workgroup Human-Computer Interaction and Usability Engineering of the Austrian Computer Society, Graz, Austria, November 25-26, 2011. ISBN 978-3-642-25363-8
  4. S. Kranzer, G. Standfest, A. Unterweger, K. Entacher. Analyses and speed optimization of CT-based microstructure determination for wood based panels. Tagungsband des 5. Forschungsforum der österreichischen Fachhochschulen FFH 2011. FH Campus Wien, 27.-28. April 2011.
  5. W. Pomwenger , K. Entacher , A. Petutschnigg , F. Watzinger , P. Schuller-Götzburg. On the Influence of Material Parameters in Finite Element Analyses of a Sinus Lift Surgical Intervention. Proceedings of the 9th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering CMBBE 2008, Valencia, Spanien, 2010.
  6. A. Petutschnigg, G. Standfest, K. Entacher, M. Ebner. Modeling Wood for Technical Product Design. 1st Conference on Forest Products, Bioenergy and Environment. Prishtina, Kosovo, Sept. 23 & 24, 2010.
  7. S.B. Kranzer, G. Standfest, K. Entacher. Speed optimization of CT-based microstructure determination on using matrix decomposition. A. Teischinger et al. (Eds.): Processing Technologies for the Forest and Biobased Product Indutries, Proceedings of PTF BPI 7.-8. Oct 2010, Salzburg University of Applied Sciences, Kuchl/Austria 2010. ISBN 978-3-643-50219-3.
  8. P. Schuller-Götzburg, K. Entacher, A. Petutschnigg, W. Pomwenger and F. Watzinger. FE-analysis of dental implants with sinus lift. O. Dössel and W.C. Schlegel (Eds.): WC 2009, IFMBE Proceedings 25/XI, pp. 76–79, 2009 (www.springerlink.com).
  9. P. Schuller-Götzburg, K. Entacher, A. Petutschnigg, W. Pomwenger and F. Watzinger. Finite Element Analysis of Sinus Lift with Cancelous Bone Graft Block. Proceedings of the 2nd South East European Conference on Computational Mechanics SEECCM 2009. M. Papadrakakis, M. Kojic, V. Papadopoulos (eds.) Rhodes, Greece, 22–24 June 2009.
  10. P. Schuller-Götzburg, K. Entacher, A.Petutschnigg, R. Forstner and H. Resch. Development of patient-optimized 3D-finite element models for an analysis of implanted shoulders. Proc. of the 8th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering CMBBE 2008 Porto, Portugal; J. Middleton, S.L. Evans, C. Holt, C. Jacobs, B. Walker (eds.) published by Arup 2009, ISBN: 978-0-9562121-0.8
  11. K. Entacher, S. Hegenbart, J. Kerschbaumer, C. Lenz, D. Planitzer, M. Seidel, A. Uhl, and R. Weiglmaier. Pith Detection on CT-Cross-Section Images of Logs: An Experimental Comparison. Proceedings of the 3rd International Symposium on Communications, Control, and Signal Processing ISCCSP 2008, Malta, 12-14 March 2008. p. 478-483. (ISBN: 978-1-4244-1688-2, IEEE Catalog Nbr.: CFP08824, Library of Congress: 2007935941)
  12. K. Entacher, D. Planitzer and A. Uhl. Towards an Automated Generation of Tree Ring Profiles from CT-Images. In: ISPA 2007 Proceedings of the 5th International Symposium on Image and Signal Processing and Analysis. pp. 174 – 180. Istanbul, Turkey, September 27-29, 2007. (ISBN 978-953-184-117-7, ISSN 1845-5956, IEEE Catalog Number 07EX1763C)
  13. K. Entacher, C. Lenz, M. Seidel, A. Uhl and R. Weigelmaier. Applicability of Motion Estimation Algorithms for an Automatic Detection of Spiral Grain in CT Cross-Section Images of Logs. In: Computer Analysis of Images and Patterns. Proceedings of the 12th International Conference, CAIP 2007. Lecture Notes in Computer Science LNCS 4673 : 36-44, 2007.
  14. B. Hechenleitner and K. Entacher. Pitfalls when using parallel streams in OMNeT++ Simulations Proceedings of the Inter-domain Performance and Simulation (IPS) Workshop February 20-21, Salzburg, Austria, pages 11-19, 2003.
  15. B. Hechenleitner and K. Entacher. On Shortcomings of the ns-2 Random Number Generator. In T. Znati and B. McDonald, editors, Proceedings of the Communication Networks and Distributed Systems Modeling and Simulation (CNDS 2002), pages 71-77. SCS, 2002.
  16. K. Entacher, P. Hellekalek, and P. L'Ecuyer. Quasi-Monte Carlo Node Sets from Linear Congruential Generators. In H. Niederreiter and J. Spanier, editors, Monte Carlo and Quasi-Monte Carlo Methods 1998, pages 188-198. Springer-Verlag, 2000.
  17. K. Entacher and T. Schell. From `pseudo´ to `quasi´. In Proceedings of the international conference MONTE CARLO SIMULATION MCS2000, Monaco, 2000, A.A.Balkema Publishers, pages 27-34, 2000.
  18. K. Entacher, T. Schell and A. Uhl. Evolutionary optimization of random number generators. In Proceedings of the international conference MONTE CARLO SIMULATION MCS2000, Monaco, 2000, A.A.Balkema Publishers, pages 19-26, 2000.
  19. K. Entacher, A. Uhl, and S. Wegenkittl. Parallel random number generation: Long-range correlations among multiple processors. In P. Zinterhof, M. Vajteršic, and A. Uhl, editors, Parallel Computation, volume 1557 of Lecture Notes in Computer Science, pages 107-116. Springer, New York, 1999.
  20. K. Entacher, A. Uhl, and S. Wegenkittl. Linear and Inversive Pseudorandom Numbers for Parallel and Distributed Simulation. In Twelfth Workshop on Parallel and Distributed Simultation PADS'98, May 26th - 29th, Banff, Alberta, Canada, 1998. Simulation Digest 28(1), ACM SIGSIM Newsletter, pages 90-97, IEEE Computer Society, Los Alamitos, California.
  21. K. Entacher. Generalized Haar function systems, digital nets and quasi-Monte Carlo integration. In H.H. Szu, editor, Wavelet Applications III, Proc. SPIE 2762, 1996.

Workshop Series

  1. K. Entacher and B. Hechenleitner. A Parallel Search for Korobov Lattice Rules. In H. Efinger, A. Uhl, editors, Scientific Computing in Salzburg, Festschrift on the Occasion of Peter Zinterhofs 60th Birthday. books@ocg.at, volume 189, Oesterreichische Computer Gesellschaft, 2005.
  2. B. Hechenleitner and K. Entacher. Selection of Good Lattice Points Utilizing a Cluster. In M. Vajteršic, R. Trobec, P. Zinterhof, A. Uhl, editors, Proceedings of Parallel Numerics ´05 Theory and Applications (ParNum05), pages 81-94, Portoroz, Slovenia, 2005.
  3. K. Entacher, B. Hechenleitner and S. Wegenkittl. A simple OMNeT++ queuing experiment using parallel streams. In R. Trobec, P. Zinterhof, M. Vajteršic, A. Uhl, editors, Proceedings of Parallel Numerics ´02 (ParNum02), pages 204-214, Bled, Slovenia, 2002.
  4. K. Entacher. Further Remarks on Long-Range Correlations among Linear Congruential Random Numbers. In G. Okša, R. Trobec, A. Uhl, M. Vajteršic, R. Wyrzykowski, and P. Zinterhof, editors, Proceedings of the international Workshop Parallel Numerics (ParNum 2000), pages 69–80, Bratislava, Slovakia, 2000.
  5. K. Entacher. O. Lendl, A. Uhl and S. Wegenkittl. Analyzing Streams of Pseudorandom Numbers for Parallel Monte Carlo Integration. In R.Wyrzykowski, H. Piech, M. Vajteršic, and P. Zinterhof, editors, Proceedings of the international Workshop Parallel Numerics’ 97, pages 59–71, Zakopane, Poland, 1997.
  6. S. Wegenkittl and K. Entacher. On the Relevance of Splitting Properties and the Compound Method in Parallel Applications of Pseudorandom Number Generators. In M. Trobec, M. Vajteršic, P. Zinterhof, and B. Robic, editors, Proceedings of the international Workshop Parallel Numerics’ 96, pages 64–74, Gozd Martuljek Slovenia, 1996.
  7. K. Entacher and P. Hellekalek. Parallel Stochastic Simulation: Inversive Pseudorandom Number Generators. In G. De Pietro, A. Giordano, M. Vajteršic, and P. Zinterhof, editors, Proceedings of the international Workshop Parallel Numerics’ 95, pages 1–14, Sorrento-Italy, 1995.
  8. K. Entacher and H. Leeb. Inversive Pseudorandom Number Generators: Empirical Results. In G. De Pietro, A. Giordano, M. Vajteršic, and P. Zinterhof, editors, Proceedings of the international Workshop Parallel Numerics’ 95, pages 1–14, Sorrento-Italy, 1995.
  9. K. Entacher. Classical and new pseudorandom number generators in the run test. In M. Vajteršic and P. Zinterhof, editors, Proceedings of the International Workshop Parallel Numerics ’94, Smolenice, Sept. 19–21, Slovakia, 1994.
  10. K. Entacher. Numerical Integration with Generalized Haar Function Systems. In P. Hellekalek, G. Larcher, and P. Zinterhof, editors, Proceedings of the 1st Salzburg Minisymposium on Pseudorandom Number Generation and Quasi-Monte Carlo Methods, Salzburg, Nov 18, 1994, volume ACPC/TR 95-4 of Technical Report Series, pages 25–41. ACPC – Austrian Center for Parallel Computation, University of Vienna, Austria, 1995.

Andere Publikationen

  1. Höhere land- und forstwirtschaftliche Schule HLFS Ursprung. Geschmäcker sind verschieden - Gene auch! Projektbericht 2011. http://steviaron.ursprung.at.
  2. K. Entacher, P. Petutschnigg, M. Eichriedler, H. Resch und P. Schuller-Götzburg. 3D-Modellierung von implantierten Schultergelenken. Poster, Erstes Forschungsforum der österreichischen Fachhochschulen FFH 2007. 11.-12. April 2007 (Tagungsband, Martin Meidenbauer Verlagsbuchhandlung, S. 423-424, 2008).
  3. P. Schuller-Götzburg, M. Eichriedler, K. Entacher, A. Petutschnigg, R. Forstner and H. Resch. Development of CT /MRI-based 3D models for implant simulation and optimization. (Abstract) J Biomech, 39, Supp1 424, 2006.
  4. P. Schuller-Götzburg, K. Entacher, A. Petutschnigg, H. Resch. Erstellung von CT/MRI basierenden patientenbezogenen 3D-FE Modellen zur Berechnung von Implantaten. Abstract in Biomaterialien 6 (2), 2005.
  5. R. Stürzenbecher, K. Entacher und R. Wimmer. Naturfaserverbundwerkstoffe für die Automobilindustrie. NOEO (www.noeo.at) 4/2004:10-13.
  6. B. Hechenleitner and K. Entacher. The Spectral-Test Server (spectral.fh-sbg.ac.at), 2004
  7. K. Entacher.Wie kam der Zufall in den Computer. NOEO (www.noeo.at) 4/2003:38-41.
  8. K. Entacher.Schöne Theorie der Gleichverteilung. NOEO (www.noeo.at) 1/2001:23-26.
  9. K. Entacher. A collection of classical pseudorandom number generators with linear structures - advanced version (random.mat.sbg.ac.at/results/karl/server/), June 2000.
  10. K. Entacher, P. Hellekalek, H. Leeb, O. Lendl, S. Wegenkittl. The pLab www-server: (random.mat.sbg.ac.at), 2000.

Presse

  • Reformpoolprojekt „Präoperative Befunde“ – Vision, Performance und Realität, Ärzte Krone 27.08.2010
  • Virtueller „Crashtest“ für Zahnimplantate, UNI Nachrichten, Salzburger Nachrichten, 12.06.2010
  • Applikation zur Unterstützung präoperativer Befundung, Wanted Mai 2010.
  • FH Salzburg: Modernste Technologien zur Holzanalyse, Campus 2009/09
  • EDV-Hilfe für den Tunnelbau, Salzburger Nachrichten, 05.Mai 2008.
  • Schulterprothesen virtuell anpassen. Salzburger Nachrichten, Montag 3. April 2006.
  • Mit dem Computertomographen ins Holz geblickt. Salzburger Nachrichten, 16. Mai 2006.
  • Karten mischen in den Köpfen. Salzburger Nachrichten, 29.09.2001.

Diverses